Configurable Relay Connection (Alarm And Aux) - ABB PVS-100-TL-B-SY2 Product Manual

C
onfigurable Relay connection (ALARM and AUX)
X2
33
S4 S5
2 8
1 7
J5 J7 J6
J1 1 2 3 4
N.C C N.O
AUX
ALARM
N.C. C N.O.
This contact can be used in different operating configurations that can be selected by
accessing the relevant section in the web user Interface "SETTINGS > Digital Outputs".
The inverter is equipped with 2 multifunction relays
configurable activation. It can be connected with normally
open contact (being connected between the N.O. terminal
and the common contact C) and with normally closed
contact (being connected between the N.C. terminal and the
common contact C). Different types of devices (light, sound,
ZGN.V2Q15.2
etc.) can be connected to the relay, provided they comply
with the following requirements:
Alternating current
J2 X1
Maximum Voltage: 160 V AC
Direct current
Maximum Voltage: 30 V DC
Cable requirements
External diameter: 6 mm
Conductor cross-section: from 28 to 16 AWG
- 94 -
5 - Installation
with
33
Maximum Current: 6 A
Maximum Current: 3 A