Table of Contents
Advertisement
C
onfigurable Relay connection (ALARM)
1
26
Settings
ENTER
Password 0000
ENTER
Alarm
ENTER
Production
Alarm
Alarm(Conf.)
Crepuscolar
The inverter is equipped with a multifunction relay with configurable acti-
vation. It can be connected with normally open contact (being connected
between the NO terminal and the common contact C) and with normally
closed contact (being connected between the NC terminal and the com-
mon contact C).
Different types of devices (light, sound, etc.) can be connected to the
relay, provided they comply with the following requirements:
Alternating current
Maximum Voltage: 240 V AC
Direct current
Maximum Voltage: 30 V DC
Cable requirements
External diameter: from 5 to 17 mm
Conductor cross-section: from 0.14 to 1.5 mm
This contact can be used in different operating configurations that can be
selected by accessing the "SETTINGS → Alarms" menu.
- 63 -
5 - Installation
Maximum Current: 1 A
Maximum Current: 0.8 A
2
Advertisement
Table of Contents
