• Insert the heads of two rear at-
tachment pins
(placed on the
13
rear part of the power module)
into the slots
on the bracket.
For horizontal mounting, the two
markings
on the bracket in-
dicate the point where the edge
of the power module have to be
placed to allow the engagement
of the rear attachment pins
• Only for vertical mounting:
Remove the previously installed
gasket protective covers from the
inverter by slinding it pulling from
the handles.
Gasket protective covers
and handles can be reu-
sed for a new installation
• Fasten all of the four side
latches
as shown it the
06
pictures.
A
.
13
06
B
A
- 62 -
5 - Installation
06
B