Table of Contents
Advertisement
T
ypes of lifting
ABB usually stores and protects individual components by suitable me-
ans to make their transport and subsequent handling easier. Nonethe-
less, as a rule, it is necessary to turn to the experience of specialised staff
to take charge of loading and unloading components.
The power module and the wiring box must be lifted using the 4 handles
(to be ordered) or alternatively using suitable lifting equipment.
04
The means used for lifting must be suitable to bear the weight of the equipment.
In case of manual lifting the number of required operators necessary to lift the equipment must
be in accordance to local regulations relating lifting limits per operator
Risk of injury due to the heavy weight of the equipment!
The handles
the enclosures.
If lifting with ropes, M8 eyebolts can be mounted in the same holes.
Handling and installation operations shall be performed only by using the special tools and
accessories provided with "PVS Installation Kit" that have to be ordered separately. The use
of these equipment are mandatory to safely install the inverter. Refer to "Kit of recommended
spare parts" chapter content in the product manual for further information.
DO NOT grab the equipment from the rear flange!
Risk of injury due to cutting surfaces and risk of equipment damange.
must be mounted into the designated holes located on
04
- 46 -
4 - Lifting and transport
Advertisement
Table of Contents
