ABB PVS-100-TL-B-SY2 Product Manual page 108

STEP 4 - Inverter country standard and Input configuration
After the grid standard is set you have 24 hours to make any changes to the grid standard
value; 24 hours later the Country Standard sub-menu will be locked, and the remaining time
shall be reset in order to have the 24 hours of unlocked operation available again to select
a new grid standard (follow the procedure "Resetting the remaining time for grid standard
variation" described in the relevant section).
- Country standard: selection of grid standard:
Set the grid standard of the country in which the inverter
is installed.
- Input mode:
Only Independent configuration are available.
Confirm the settings by clicking "END" and the inverter will
reboot.
A notification will confirm that the wizard is completed.
- 108 -
7 - Operation