Table of Contents
Advertisement
C
onfigurable Relay connection (ALARM and AUX)
X2
33
S2
S1
S3
J4
J2
J3
J1
X1
N.C
C
N.O
AUX
ALARM
N.C.
C
N.O.
The inverter is equipped with 2 multifunction relays
configurable activation. It can be connected with normally
open contact (being connected between the N.O. terminal
and the common contact C) and with normally closed
contact (being connected between the N.C. terminal and
the common contact C). Different types of devices (light,
sound, etc.) can be connected to the relay, provided they
comply with the following requirements:
J9
J10
J6
Alternating current
Maximum Voltage: 160 V AC
Direct current
Maximum Voltage: 30 V DC
Cable requirements
External diameter: 6 mm
Conductor cross-section: from 28 to 16 AWG
This contact can be used in different operating configurations
that can be selected by accessing the relevant section in
the web user Interface "SETTINGS > Digital Outputs".
- 92 -
5 - Installation
with
33
Maximum Current: 6 A
Maximum Current: 3 A
Advertisement
Table of Contents
