Table of Contents
Advertisement
Cleaning the Filter Unit
Refrigerated centrifuges have a filter unit to protect the cooling device.
1.
Pull the centrifuge to the edge of the table.
2.
Pull the clip below the sucking grid and remove the filter unit completely by pulling it
down.
3.
Remove the cumulated dust with a soft cloth.
4.
Inserting the filter again the labeling Front must show to the front of the centrifuge.
5.
Push the filter upwards into the slot until the clip locks in the bottom plate.
Maintenance and Care
57 / 89
Advertisement
Table of Contents
Troubleshooting
