Table of Contents
Advertisement
Isotempâ GP & FMS Refrigeration
Concealed Loss or Damage
Installation
Selecting a Location
Leveling The Unit
Concealed loss or damage refers to loss or damage, which
does not become apparent until the merchandise has been
unpacked and inspected. Should either occur, make a written
request for the carrier's agent within 15 days of the delivery
date; then file a claim with the carrier since the damage is the
carrier's responsibility.
If you follow the above instructions carefully, we will
guarantee our full support of your claim to be compensated
for loss from concealed damage.
DO NOT – FOR ANY REASON – RETURN THIS UNIT
WITHOUT FIRST OBTAINING AUTHORIZATION
Choose a location for the refrigerator that will provide at least
four inches of clearance between the cabinet and any adjacent
vertical surface at the sides and four inches at the rear.
Twelve inches of clearance is required above the top surface
of the refrigerated cabinet. Appropriate electrical power must
be available. Locate the refrigerator within eight feet of the
power outlet so that no extension cord is required.
The refrigerator must be level in order to provide adequate
condensate drainage as well as proper door alignment and
operation. The refrigerator should be in its final operating
location and set so that it is firmly positioned on the floor.
After discarding crating screws and wood base, level the
freezer side-to-side and front to back by adjusting the
supplied leveling feet (Part Number - SPN105192). The
leveling feet can be adjusted so the front of the unite is
slightly higher than the rear – this will allow the door to close
easily if it is left halfway open.
2 of 8
Page
Advertisement
Table of Contents
