Table of Contents
Advertisement
Caution
When servicing the unit, disconnect
plug from the electrical power source
Caution
Do not use any type of abrasive such
as steel wool or fluids, such as gaso-
line, Naptha or paint thinner, that could
be harmful to plastic materials, door
gasket and/or painted surfaces for
cleaning.
Maintenance
Cabinet Cleaning
The cabinet interior should be cleaned frequently. Any
spilled liquid should be wiped off immediately. Stains
resulting from some spills can be permanent if not quickly
removed. The cabinet exterior should be cleaned occa-
sionally. A mild detergent and lukewarm water or a solu-
tion of bicarbonate of soda (1 tablespoon per gallon of
water) is recommended for cleaning the interior and exte-
rior of the cabinet. All surfaces should be rinsed and thor-
oughly dried.]
Cleaning the Condenser
The condenser is located in front of the compressor fan,
which is on the top, left side of the swinging door model
refrigerators, and behind the base grill of the sliding door
model refrigerators. The condenser should be cleaned
before becoming clogged with dirt/dust. Construction or
other dirt causing environments may significantly increase
the required frequency. The condenser should be
cleaned at least once a year.
Condensate Evaporator Pan
The condensate evaporator pan is located behind the
compressor fan, which is on the top, left side of the
swinging door model refrigerators, and behind the base
grill of the sliding door model refrigerators. This pan
should be cleaned at least once a year to prevent foul
odors and operate efficiently. Vacuum clean if dry, or
sponge clean with soapy water.
19
Advertisement
Table of Contents
