3� 3� Open / Close The Centrifuge Lid - Fisher Scientific Fisherbrand accuSpin Micro Series Instruction Manual

2. Press the MINUS / PLUS buttons
The acoustic signal is turned on or off.
3. Press STOP to confirm the pre-selected value.
3. 3. Open / Close the Centrifuge Lid
To open the centrifuge lid
Press the Open button on the control panel.
The display shows the following:
SPEED
To close the centrifuge lid
Close the centrifuge lid by pressing down on it lightly in the middle or on both sides. The
locking mechanism engages to close the lid safely. The lid should audibly click into place.
Double-check whether the locking mechanism has engaged properly.
WARN ING
Operation
X G
RPM
XG RPM TIME
PULSE OPEN
START STOP
Do not use the mechanical emergency door release as regular procedure
to open the centrifuge. Use the mechanical emergency door release only
if a malfunction or power failure occurs and only when you have made
sure that the rotor has stopped spinning (refer to
Lid Release" on page
under the TIME display in the middle.
TEMP
62).
39 / 89
COOL
"Mechanical Emergency