Maintenance; Cleaning Of Units; Interior/Exterior And Door Gaskets - Fisher Scientific Isotemp 05FFEEFSA Operation And Installation Manual

Maintenance

Cleaning of Units

• Turn off the freezer.
• Wash interior liner with a solution of two tablespoons of
baking soda and a quart of warm water. Then, rinse and
wipe it out.
• Do not use soaps, detergents, scouring powders, spray
cleaners or the like for cleaning the interior liner, as these
may cause odors in the freezer compartment.
• Wash the ice cube tray and shelves in a mild detergent
solution and dry with a soft cloth.
• Wipe the exterior surface with a soft cloth dampened with
soapy water and dry it with a soft cloth. Normal appliance
spray cleaners may be used for the exterior only.
Note: Make no attempt to service or repair a
Thermo Scientific product under warranty before consulting
your Thermo Scientific dealer. After the warranty period, such
consultation is still advised, especially when the repair may be
technically sophisticated or difficult. If assistance is needed
beyond what the distributor can provide, please call
Customer Service at 800-438-4851. No merchandise should
be returned directly to the factory without obtaining a Return
Materials Authorization (RMA) number from
Customer Service.
Interior/Exterior and Door
Gaskets
Use only mild soap and water to clean the door gasket. Never
use acid, chemical thinners, gasoline, benzene or the like to
clean any part of the freezer. Boiling water and benzene may
deform or damage the plastic parts.
WARNING: Disconnect plug from electrical
outlet before attempting any maintenance or
repair of this unit.
Any internal adjustments or repairs must be
performed by a qualified service
representative.
Isotemp Freezer, Flammable Materials Storage & Explosion Proof Freezers Maintenance | 13