Table of Contents
Advertisement
Cleaning Product
Thermo Scientific
Maintenance
Section 5
Item
Connection status of power cord or plug
Damages in power cord or plug
Damages or cleanliness of top plate
Cleanliness of main body and accessories
Damages in switches, buttons, LED's, dial knobs
Heating capability check (up to 350℃)
Stirring capability check (up to 2000 rpm)
Assembly status of all parts or accessories
• Never immerse this instrument in water or any other liquid!
• Do not allow any liquid or wet material to get inside the instrument when
cleaning.
• Do not reconnect this instrument to power outlets until all cleaned surfaces
have dried.
• Do not use chlorine bleach, ammonia-based cleaners, abrasives, ammonia,
or metal scouring pads when cleaning.
• During cleaning and general operation take care not to scratch the surface
of the ceramic coated top plate as this could result in subsequent thermal
breakage.
Inspection Interval
Daily
Weekly
●
●
●
●
●
●
●
●
Hotplate Stirrer
5-1
Advertisement
Table of Contents
