3� Operation; 3� 1� Control Panel - Fisher Scientific Fisherbrand accuSpin Micro Series Instruction Manual

3. Operation
3. 1. Control Panel
No� Item
Speed / RCF
➀
Value
Display Mode
➁
Running Time
➂
Temperature
➃
(SNOWFLAKE)
PULSE
➄
OPEN
➅
START
➆
STOP
➇
ARROW
➈
TOGGLE
➉
Figure 4: Control Panel Overview
Operation
X G
RPM
SPEED XG RPM TIME
PULSE
START
Description
The speed (rpm) or RCF value (x g) is displayed here. You can modify the value
using the MINUS / PLUS buttons
x g using the TOGGLE button
Use the TOGGLE button
sample / chamber temperature, run time counter from start or preset speed on).
The running time is displayed here. You can modify the value using the MINUS /
PLUS buttons .
The temperature is displayed here. You can modify the value using the MINUS /
PLUS buttons . You can pre-temper the centrifugation chamber and the
empty rotor before the centrifugation run starts using SNOWFLAKE button.
NOTICE This function is only available on refrigerated centrifuges.
Press PULSE to immediately start the centrifugation run and accelerate up to the
maximal permissible end speed (depending on the used rotor). Releasing PULSE
initiates a stopping process according to the set acceleration and braking curve.
Press OPEN to activate the automatic door release (possible only if device is
powered on and if the rotor is fully stopped).
Press START to start a centrifugation run or to accept the current settings.
Press STOP to manually end the centrifugation run.
Use the MINUS / PLUS buttons
above.
Use the TOGGLE button
37 / 89
TEMP COOL
OPEN
STOP
. below. You can switch between rpm and
.
to change the display mode. (speed / RCF value,
. to set the parameter in the field directly
to change the display mode.