Specifying How To Detect Multifeed - Fujitsu fi-5530C2 Operator's Manual

6.5

Specifying How to Detect Multifeed

One of the following is selected to detect a multifeed:
• Check overlapping
• Check length
• Check overlapping and length
The following describes what condition is required for each selection:
■ Check overlapping
Paper weight
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.
■ Check length
Document length deviation
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
■ Check overlapping and length
Paper weight
Document length deviation
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.
ATTENTION
52 g/m
1% or less
52 g/m
1% or less
Multifeed detection by overlap will often mis-detect very thick paper or
plastic document.
When scanning documents like this, please disable the multifeed
detection.
fi-5530C2 Image Scanner Operator's Guide

6.5 Specifying How to Detect Multifeed

2 2
- 127 g/m (13.9 lb to 34.0 lb)
2 2
- 127 g/m (13.9 lb to 34.0 lb)
6
129