Math Label - Rigol 2000 Series User Manual

Digital oscilloscope
Hide thumbs Also See for 2000 Series:
Table of Contents

Advertisement

RIGOL
For example, Variable1 is set to 6.1074×10
Variable: Variable1
Mantissa: 6.1074
Exponent: 8
5. Operator
The functions of the operators are listed in the following table.
Table 6-4 Operators
Operator
+ - * /
( )
< > <= >=
==
!=
!( || &&
6. Figure
Select from figure 0 to 9, decimal point and character E. Wherein, character E
represents the nth power of 10. For example, 1.5E3 means 1.5×10

MATH Label

The instrument uses
use, you can also set a label for the math operation results, for example,
Press MATH  Operate to select the desired math operation and press Label to
open the label input interface. Then, input the desired label according to the
instructions in "Channel Label".
Note:
The user-defined label can include uppercase English letters (from A to Z),
lowercase English letters (from a to z), numbers (from 0 to 9), underline and space;
the length of the label cannot exceed 4 characters.
6-14
Function
Arithmetic operators: add, subtract, multiply and divide
Parentheses: used to increase the priority of the operation
enclosed in the parentheses
Relationship operators: lower than, greater than, lower
than or equal to, greater than or equal to, equal to, not
equal to
Logic operator: NOT, OR, AND
to mark the math operation results by default. For ease of
Chapter 6 MATH and Measurements
8
via the following settings.
MSO2000A/DS2000A User Guide
3
.
.

Advertisement

Table of Contents
loading

Table of Contents