Rigol 2000 Series User Manual page 268

RIGOL
Figure 14-5 External Disk (To Create a New File)
5) Press OK to execute the saving operation.
2. Load the specified type of file in the external USB storage device (take
trace storage as an example).
1) Press Storage  Storage to select "Traces" and then press Load to turn
on the disk management interface. Use
down
to select the desired file to load and then press Load to load the
2) Use
selected file.
Figure 14-6 External Disk (To Select the File to Load)
14-8
to open the USB storage device, as shown in Figure 14-6.
Chapter 14 Store and Recall
to select "Disk D" and press
MSO2000A/DS2000A User Guide