Rigol 2000 Series User Manual page 55

Chapter 1 Quick Start
Displayed in "hh:mm (hour:minute)" format. When printing or storing
the waveform, the output file will contain this time message. Press
Utility  System  System Time  System Time to set through
the following format: yyyy-mm-dd hh:mm:ss (year-month-date
hour:minute:second)
Sound Icon

When the sound is enabled,
enable or disable the sound.
USB Storage Device Icon

When a USB storage device is detected,
PictBridge Printer Icon

When a PictBridge printer is correctly connected to the oscilloscope,
be displayed in this area.
20. Operation MENU
Press any softkey to activate the corresponding menu. The following
symbols might be displayed in the menu.
Denote that
parameter items. The backlight of
selection is valid.
Denote that
backlight of
Denote that
press
pop-up numeric keyboard. The backlight of
parameter input is valid.
Denote that you can rotate the "Navigation Knob" to quickly
adjust/locate parameters.
Denote that you can rotate
press down
constant on.
Denote that the current menu has several options.
Denote that the current menu has a submenu.
Press this key to return to the previous menu.
Note:
The following direction keys might appear in the grid at the lower-left
corner of the menu bar:
Denote that you can open the next page of the menu.
MSO2000A/DS2000A User Guide
will be displayed. Press Utility  Sound to
on the front panel can be rotated to select the
can be rotated to modify the parameter values. The
turns on when the parameter input is valid.
can be rotated to modify the parameter values and
to input the desired paramrter values directly using the
to select the parameter. The backlight of
will be displayed.
turns on when the parameter
turns on when the
to adjust the parameter and then
RIGOL
will
is
1-25