Vdr] Window - Furuno FAR-3320-NXT Instruction Manual

1. INITIAL SETTING AND ADJUSTMENT
8. Select the type of the printer from the [Printer Model] pull-down menu.
[HP Officejet Pro 8000]
[HP Officejet Pro 8100]
[HP Officejet Pro 8210]
[HP Officejet 100 Mobile]
[HP Officejet 200 Mobile]
Note 1: For no printer, set [Printer Model] to [HP Officejet 100 Mobile].
Note 2: The printer HP Officejet Pro 8000 Enterprise Printer can not be connected
to the processor unit.
9. Select the port that connects the printer from the [Printer Port] pull-down list.
HP Officejet 100 Mobile/HP Officejet 200 Mobile
HP Officejet Pro 8000/HP Officejet Pro 8100/
HP Officejet Pro 8210
[USB]: Only the processor unit connected to the printer can print.
[Network]: EC-3000s in the same network
can print. The IP address of the printer is
shown on the [Printer] screen. Do not
change the IP address.
10. To automatically print images captured with [Screenshot] function, check the
checkbox for [Auto Print out (SS)].
11. To connect a service gateway, select [Connected] at [Service gateway] then the
IP address and the port number appear below the [Connected] item. Do not
change these settings.
12. Click [Save] on the info bar. Several confirmation messages appear. Click [OK] to
reboot the system. To discard all changes, click [Discard Changes].
1.2.3

[VDR] window

1. Access the [Common Installation Setting] menu and click [Basic Setting] on the
tab bar.
2. Click [VDR] on the menu bar.
1-8
Setting option
Printer
Remarks
Connect the printer to LAN1 port or USB port, and then
set the IP address of the printer to "192.168.31.241".
For how to set the IP address of the printer, see the op-
erator's manual of the printer.
Connect the printer to the USB port of the processor
unit.
Printer Port
USB
USB, Network