Table of Contents
Advertisement
1. INITIAL SETTING AND ADJUSTMENT
1.4.4
Sensor adapter configuration
A maximum of eight sensor adapter MC-3000S can be connected to the sensor net-
work. In case of the redundant configuration, sixteen sensor adapters can be connect-
ed to the network. The MC-3000S can connect a max. ten additional units (MC-3010A/
3020D/MC-3030D). Note that a maximum of five MC-3010A can be connected to MC-
3000S.
1. Click [Sensor Adapter] on the menu bar.
2. Check the check box of [MCV001] to activate.
3. Click [Details] to display the window as shown below. For the descriptions of the
each items, see step 3 of subsection 1.4.2.
4. Click [No.1 Sensor Adapter] on the menu bar.
The sensor adapter consists of four sub units: [Serial Input/Output], [Digital Input],
[Digital Output], and [Analog Input].
5. Click [Serial Input/Output]. There are eight ports in the Serial Input/Output. [Serial
01] to [Serial 04] can input/output at 38,400 bps for the AIS and Gyro or TTD out-
put.
The connector no. on the MC-3000S board and the corresponding serial port no.
are shown in the following table.
1-24
Advertisement
Table of Contents
