Table of Contents
Advertisement
1.4.8
Customized sensor setting
Set the sensor types and manufacturers in the [Sensor Setting] menu.
1. Click [User Sensor Model List] on the menu bar.
2. Click the appropriate sensor to edit. The figure below shows an example where
the [GPS Sensor] is selected.
[Built-in Sensor
Model List]
[User Sensor
Model List]
3. To save the configuration, perform a consistency check, then save the configura-
tion data on the [Save and Sync] menu.
Item
Displays the sensor types and manufacturers preset already.
[Manufacture]: Manufacturer of sensor
[Sensor Type No.]: Type of sensor
Click the [New] button to add a new type or manufacturer of sen-
sor. Enter the desired manufacturer name and the desired type
of sensor, then click the [OK] button.
Click the [Delete] button to delete the added contents. The con-
firmation message appears, then click the [OK] button.
Note: The contents added or deleted in this setting are applied to
the [Sensor Setting] menu. See section 1.4.1.
1. INITIAL SETTING AND ADJUSTMENT
Remarks
1-31
Advertisement
Table of Contents
