Radar Installation] Menu; System Monitor] Menu; Software Update] Menu - Furuno FAR-3320-NXT Instruction Manual

1.11

[Radar Installation] Menu

You can confirm the radar setting on the [Radar Installation] menu. For the details of
the radar setting, see the installation manual for the chart radar.
1.12

[System Monitor] Menu

This menu displays system information of units as shown below.
• Processor unit (EC-3000)
• Monitor (Furuno made only)
• Control unit
• Radar processor unit (FCR-2xx9 or FAR-3000)
• Sensor adapter
Click [System Log] to save the log data to a medium (PC, USB memory, etc.).
1.13

[Software Update] Menu

Update the software of the processor unit EC-3000, antenna unit (FCR-2xx9, FAR-
3000, FAR-3000 PSU), and control unit RCU-024/025/026 on the [Software Update]
menu. For the update of the sensor adapter, see section 2.3.
Note: To update the software with the update file, access the [Common Installation
Setting] menu via LAN connection. To update the software with the DVD, access the
[Common Installation Setting] menu with the control unit.
1. INITIAL SETTING AND ADJUSTMENT
9876-xxxx
GPS
Sync
0
1-51