Setting For Sensor Adapter; How To Set The Equipment Id - Furuno FAR-3320-NXT Instruction Manual

2. SETTING FOR SENSOR
ADAPTER
The default Equipment ID of the sensor adapter is "MCV016". Set the individual Equip-
ment ID before connecting to the network.
Connect the sensor adapter to the processor unit after setting the Equipment ID. Then
enter the other settings of the sensor adapter from the [Common Installation Setting]
menu on the processor unit.
2.1

How to Set the Equipment ID

1. Set the IP address and subnet mask of the PC as shown below.
IP address: 172.31.16.200
Subnet mask: 255.255.0.0
2. Connect the laptop PC to the sensor adapter with the LAN cable.
3. Activate the web browser on the PC.
4. Enter the default IP address of the sensor adapter: "172.31.17.108".
5. Access the [Common Installation Setting] menu and click [Basic Setting] on the
tab bar.
6. Select the Equipment ID from the pull-down list. The [Equipment Name], [Equip-
ment Type No.] and [IP Address] are automatically entered according to the
Equipment ID.
Setting range: [MCV001] to [MCV016]
7. After entering the setting, click [Save] on the info bar. Several confirmation mes-
sages appear. Click [OK] to reboot the system.
If you want to discard the entry, click [Discard Changes].
MCV016
No.16 Sensor Adapter
MC-3000S
31 17 108
2-1