Mura Ipx Series 4K Decode And Display Card - Matrox C Series User Manual

Mura IPX Series 4K Decode and Display card

Operating systems supported
Card type
Form factor
Memory
Connectors
Output formats supported
Outputs supported
Inputs supported
Maximum output resolutions
IP stream support
Video CODEC engine
Audio stream support
‡
H.264 decode
Maximum card dimensions
Regulatory compliance
* A Mura IPX Series display card is a standalone controller that doesn't require an operating system.
† DVI and HDMI monitors are supported using identical third-party active adapters (sold separately).
‡ Standard resolutions listed above. Support for custom resolutions available. For specific requirements, contact your Matrox
representative.
62 Matrox Display Wall – User Guide
4× Mini DisplayPort, 1× 100/1000 Base-T RJ45 Ethernet Port
†
two 3840 × 2160 @ 60 Hz, four 3840 × 2160 @ 30 Hz,
eight 1920 × 1080 @ 60 Hz, sixteen 1920 × 1080 @ 30 Hz,
Class B: FCC, CE, RCM, VCCI, ICES-3, CSA, KC
MURAIPXO-D4LF • MURAIPXO-D4LHF
*
—
PCIe ×8 2.0 (power only)
ATX
4 GB
DisplayPort, DVI, HDMI
4
IP
4096 × 2160 @ 30 Hz,
3840 × 2160 @ 30 Hz,
2560 × 600 @ 60 Hz
RTSP, RTP, SRT, MPEG-2 TS
H.264
or numerous SD channels
L: 9.02 in / W: 0.75 in / H: 4.376 in
L: 22.9 cm / W: 1.91 cm / H: 11.1 cm