Network Connector - Matrox C Series User Manual

The following describes the behavior of this LED indicator.
LED Color
Green (solid)
Green (slow blink)
Green (fast blink)
Amber (solid)
Amber (slow blink) Card is restarting and is in maintenance mode.
Amber (fast blink)
Red (solid)
Red (slow blink)
Black (off)

Network connector

The network connectors on your Mura IPX Series cards use LED
indicators to provide information on the network activity and presence.
The following describes the different network connector LEDs.
LED color
No LED (black)
Green (fast blink)
Orange
Behavior
Card is active.
Card is restarting.
Factory reset in process.
Card is in maintenance mode.
Card is updating the firmware.
Card has detected a fatal error. Try restarting your system. If after
restarting your system the LED indicator is still red, contact your vendor
for technical support (see "Customer support", page
Card has detected a misconnection. Try restarting your system. If after
restarting your system the LED indicator is still red, contact your vendor
for technical support (see "Customer support", page
No power. Make sure your card is properly installed. Also, make sure your
system isn't in power saving mode
page 24).
For more information, contact your vendor
94).
Network activity
No data transfer in progress
or no network detected.
Data transfer in progress.
(see "Installing your Matrox cards",
(see "Customer support", page
Network communication
—
Matrox Display Wall – User Guide 29
94).
94).
Network
Network
activity presence
Network presence
No communication
established.
—
established.