Setting Up A Display Wall; Setup Overview; Mura Ipx Series Display Card; Mura Ipx Series Capture Cards - Matrox C Series User Manual

Setting up a display wall

The following outlines the steps for installing, connecting, and setting up your Matrox card.

Setup overview

Mura IPX Series display card

Install your Matrox cards –
1
2 Connect your cards –
Update the software on your cards –
3
4 Configure your display wall. You can use the following:

Mura IPX Series capture cards

Install your Matrox cards –
1
Connect your cards –
2
Install your Matrox software –
3
Configure your display wall. You can use the following:
4
Using third-party graphics hardware
Install your Matrox cards –
1
Connect your cards –
2
* For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see "Matrox System Builder's Guide."
see page
Matrox Network API –
MuraControl for Windows –
see page
Matrox Network API –
Matrox PowerDesk – see page
MuraControl for Windows –
Third-party hardware. For more information, see the documentation for your
graphics hardware.
see page 24.
32.
see page 54.
see page 55.
see page 57.
see page 24.
34.
see page 53.
see page 55.
55.
see page 57.
*
with Mura IPX Series capture cards
see page 24.
Matrox Display Wall – User Guide 17