Table of Contents
Advertisement
Device connector
HDMI
Network
(RJ-45)
* Only active adapters (sold separately) are supported. Passive adapters aren't supported.
Once all your cards are connected, restart your system and install your Matrox software
"Installing your software", page
Description
If your monitor has an HDMI connector, use a mini DisplayPort to
*
HDMI adapter (active
) to connect to the mini DisplayPort connector
on your Matrox card. Connect your monitor to the HDMI connector
on your adapter.
If your video device streams to an IP network, connect a network
cable to your Matrox card. Your video device must stream using an
RTSP, RTP, SRT, or MPEG-2 TS protocol.
53).
Matrox Display Wall – User Guide 33
(see
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers