Configuring Your Display Wall Layout; Using The Network Api To Manage Your Layout; Using Powerdesk To Set Up Your Multi-Display Layout; Mura Mpx Series - Matrox C Series User Manual

Configuring your display wall layout

Using the Network API to manage your layout

Use the Matrox Network API to set up your outputs and configure the advanced features of your
display wall layout.
For more information, see the documentation included with the Network API.

Using PowerDesk to set up your multi-display layout

Setting up your multi-display layout using PowerDesk software involves entering the
number of columns and rows for your display wall layout and adjusting the settings for
your outputs (such as rotation, resolution, color palette, and refresh rate).

Mura MPX Series

To set up a multi-display layout for your Mura MPX Series card:
Right-click your Windows desktop and select
1
main interface of Matrox PowerDesk, click
Under
2
3 Enter the number of
Preview your setup in the work area. If you're satisfied, click
4
multi-display layout. Otherwise, click
Depending on your installation and connection, you may need to manually rearrange
the outputs of your multi-display layout in PowerDesk to match the physical layout of
your display wall.
For more information on setting up multiple displays, see Matrox PowerDesk help.

C-Series

To set up a multi-display layout for your C900 or C680 card:
Right-click your Windows desktop and select
1
main interface of Matrox PowerDesk, click
Select a multi-display mode:
2
C900 – Click
, select
Basic configurations
Columns
Set up 3x3 configuration
Launch Matrox PowerDesk
Multi-Display Setup
Use stretched mode
and for your multi-display setup, then click
Rows
.
Cancel
Launch Matrox PowerDesk
Multi-Display Setup
.
Matrox Display Wall – User Guide 55
. From the
.
.
or to apply your
OK Apply
. From the
.
.
OK