Energetics POWER RUN 2010HRC Manual page 27

ERROR
PROBLEM
CODE
1. The console
could not
obtain the
incline value
within certain
E 3 time.
2. The incline
motor is
working
outside its
parameters.
Ensure there is adequate clearance between
the incline nut and motor cast.
Thoroughly inspect the data cable to ensure
that the wiring has not been damaged.
ERROR
PROBLEM
CODE
No heart rate signals
within 20 seconds
E 5
when using Body Fat
program.
POSSIBLE CAUSES
1. Data jack has a poor
connection.
2. Incline motor has become
damaged (internal
damage may be evident
by excessive motor case
heat).
3. Data cable has been
damaged.
4. Controller is burnt.
Replace the incline motor if the associated
fuse blows under constant operation.
POSSIBLE CAUSES
1. Misplaced gesture on
hand pulse sensors.
2. Hand pulse sensors
are faulty or damaged.
27
CORRECTION
1. Re-insert the wiring jack
and ensure that a firm
connection is made.
2. Reset the height of the
incline nut and restart
the machine.
3. Replace the incline
motor.
4. Replace the controller.
CORRECTION
1. Try again with
appropriate gesture.
2. Replace the hand pulse
sensors.