Energetics POWER RUN 2010HRC Manual page 12

CAUTION
*** THE MACHINE WILL SHUT DOWN THE POWER WHEN
ELECTRICITY IS OVERLOADED.
A. Unplug the power cord from the machine's socket.
B. Push in the safety switch.
C. Replug the power cord into the machine's socket.
** DO NOT PUSH IN THE SAFETY SWITCH BEFORE UNPLUGGING THE
MACHINE'S POWER CORD.
CAUTION
SHOULD YOU FAIL TO SWITCH OFF THE TREADMILL AFTER TURNING OFF THE
CONSOLE, THERE WILL STILL BE CURRENT RUNNING WITHIN THE CONSOLE.
THIS TREADMILL IS EQUIPPED WITH A SAFELS CONTROL PROGRAM THAT WILL
AUTOMATICALLY SHUT DOWN THE MACHINE AFTER 6 HOURS.
IN THE EVENT OF AN AUTOMATIC SHUT DOWN, PLEASE FOLLOW THE
PROCEDURES BELOW TO RESTART YOUR TREADMILL.
1. UNPLUG THE POWER CORD FROM THE MACHINE SOCKET
2. PLUG THE POWER CORD IN THE SOCKET TO RESTART THE MACHINE.
12