Moving And Storage - Energetics POWER RUN 2010HRC Manual

Moving and Storage

FOLDING
After your treadmill is completely assembled,
you may fold the machine into the upright
position for storage.
NOTE! Make sure the treadmill's elevation is
at its lowest position before folding the deck to
avoid damage to your machine.
To fold the machine, raise the deck until it
locks into position. (Figure 1)
Make sure you hear the click sound of the
deck locking into position. This is to ensure the
deck is locked in place and will not drop back
down.
TO RELEASE THE RUNNING DECK
Hold the upper end of machine, pull the pin to
put down the frame to the ground. (Figure 2)
NOTICE! This machine has a built-in safety
unfolding feature to help lower the deck slowly.
Please make sure there are no children or
other things under the deck when you lower it.
TO MOVE THE TREADMILL
Before moving the treadmill, be sure the power
cord is unplugged from the wall and the
treadmill.
Fold up the running deck until it is locked
(Figure 3) and push the equipment on its
transportation wheels. Hold the handlebars to
move the treadmill forward. To prevent
malfunctioning of the treadmill, store it in a dry
place with as little temperature variation as
possible, protected against dust. Always
unplug the treadmill from the electrical outlet
when not in use.
11