Reception Features
Adjusting the Printing Density
You can economize on toner by ad-
justing the image density used when
generating all printed output (Output
Density), or just for incoming faxes,
reports, and lists (Toner Saving).
Toner saving
Use this feature to save over 50% of
the toner normally used for printing
incoming faxes, reports, and lists.
4
Limitation
❒ This feature does not apply to cop-
ies or prints made with the printer
option. However, the optional
printer interface unit has its own
toner saving function.
Note
❒ When receiving faxes sent using
Photo (Halftone) mode from this
maker's machines, turn Toner Sav-
ing off.
❒ When Toner Saving is turned on,
printed images will come out light-
er than usual. To check on the im-
age quality, print out the User
Parameter List. See p.148 "Printing
the User Parameter List".
❒ If the other party sends you a fax
using the Photo (Halftone) mode,
the printed fax image may differ
from the document image.
❒ You can turn Toner Saving on or
off with the User Parameters. See
p.138 "User Parameters" (switch
12, bit 2).
78