Gestetner F540 Advanced Features page 71

Note
❒ Standard Memory Transmission is
used instead of Parallel Memory
Transmission in the following cas-
es:
• When the line is busy and a con-
nection could not be made
• With Send Later
• When you store a document for
Memory Transmission while
another communication is in
progress
• When you send just an Auto
Document
• With Duplex Original
• With Batch Original Documents
Transmission
❒ When the amount of remaining
memory drops below a certain lev-
el, the machine switches to ordi-
nary Memory Transmission and
the Parallel Memory Transmission
feature is disabled until more
memory becomes available.
❒ If you press the { { { { Clear/Stop} } } } key,
the document jams, or memory be-
comes full during Parallel Memory
Transmission, the machine stops
transmitting and prints the Com-
munication Result Report (Memo-
r y T r a n s m i s sio n ) . T h e fil e i s
erased.
❒ You can switch the Parallel Memo-
ry Transmission function on or off
with the User Parameters. See
p.138 "User Parameters" (switch
07, bit 2).
More Transmission Functions
3
63