Entering Energy Saver Mode - Gestetner F540 Advanced Features

Appendix
Values vary according to options installed and settings of the User Parameters.
In Energy Saver Standby mode, letting the heating roller cool to room tempera-
ture will reduce the amount of electricity the fax machine consumes. However,
the fax machine will not print incoming messages right away, it will store them
in memory and print them out after the roller warms up.
In Fax Standby mode, letting the heating roller cool halfway reduces the amount
of electricity the fax machine consumes, but not as much as letting it cool to room
temperature. On the other hand, since warming up takes only a short time, in-
coming fax messages can be printed right away.
Note
❒ You can still send fax messages stored in memory while the machine is in En-
ergy Saver Mode.
❒ Even in Energy Saver Standby mode, indicators that blink or light during
communication or reception still work. When the Substitute Reception, Mem-
ory Lock or Confidential message indicator lights, exit Energy Saver Mode
and take appropriate action.
❒ While the Energy Save Timer is activated, the machine stays in the Energy
Saver Standby mode. If a fax message comes in while the heater is turned off,
it is stored in the machine's memory (Substitute Reception), and printed after
the specified time is reached. See p.136 "Energy Save Timer".

Entering Energy Saver Mode

The machine enters Energy Saver Mode when:
• Nobody uses the machine for about 5 minutes.
• The user holds down the { { { { Energy Saver/Clear Modes} } } } key for about 2 seconds.
Note
❒ If you want to change the five minute period to one or three minutes, or if you
do not want your machine to enter the Energy Saver Mode automatically,
please contact your service representative.
10
- When the Machine Does Not Enter Energy Saver Mode -
- -
The machine does not enter Energy Saver Mode when:
• The optional handset or an external telephone is not placed correctly
• The main paper tray is not loaded into the machine
• Either the ADF unit, ADF cover or the side cover is open.
• An original is jammed
• The machine is out of order
• There is no paper loaded into either the main paper tray or the optional paper
tray unit
202