Adjusting The Image Density Of Prints; Before Making A Master; After Making A Master - Gestetner 5499 Operating Instructions Manual

Adjusting the Image Density of Prints

There are two ways to adjust the im-
age density of prints:
❖ ❖ ❖ ❖ Before making a master
Use the { { { { Image Density} } } } key.
❖ ❖ ❖ ❖ After making a master
Use the { { { { W W W W } } } } { { { { V V V V } } } } (Speed) keys.

Before Making a Master

A A A A
Press the { { { { Image Density} } } } key to
adjust the image density.
Stamp
Make-Up
Over lay
Skip Feed Edge Erase
B B B B
Press the { { { { Start} } } } key.
Image Density
Lighter On Line
Normal
Darker 1
Auto On Line
Darker 2
Economy Mode
Original Storage
Job Separator
ZDZS010N
Adjusting the Image Density of Prints

After Making a Master

A A A A
To increase the image density,
press the { { { { W W W W } } } } key. To reduce the
image density, press the { { { { V V V V } } } } key.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
1
25