Table of Contents
Advertisement
Maintaining Your Machine
Replacing the ADF Maintenance Kit
In order to ensure maximum perfor-
mance of your fax machine, the ADF
Maintenance Kit is provided. You can
replace the ADF Maintenance Kit af-
ter approximately 45,000 originals
have been scanned with the ADF.
You need to replace the ADF Mainte-
nance Kit when you are prompted to
do so by a message on the display:
Follow the procedure below to re-
place the ADF Maintenance Kit.
Note
❒ If your service representative is re-
sponsible for performing this oper-
ation, this message will not appear.
❒ If you do not have time to perform
the maintenance at that time, at
step C below, select "No", and then
press the { { { { OK} } } } key to return to the
standby display so you can contin-
ue using the fax machine. Howev-
er, after you scan an additional 100
originals with the ADF, you will be
9
prompted once again to replace
the ADF Maintenance Kit.
❒ After "
Replace ADF Maintenance
" message appears in the dis-
Kit
play, you cannot continue to send
fax messages and perform other
operations.
A A A A
A message on the display prompts
you to replace the ADF Mainte-
nance Kit when it is time for re-
placement.
180
B B B B
Press the { { { { OK} } } } key.
C C C C
Confirm that "Yes" is selected,
and then press the { { { { OK} } } } key.
Note
❒ If you want to replace the ADF
Maintenance Kit later, press 0
or 1 to select "No", and then
press the { { { { OK} } } } key. To replace
the ADF Maintenance Kit when
"
Replace ADF Maintenance
" message is not displayed,
Kit
yo u need to re set t he A DF
counter. See p.116 "Resetting
the ADF Counter".
D D D D
Replace the ADF Maintenance Kit.
Follow the instructions in "Replac-
ing the ADF Maintenance Kit" sup-
plied with the ADF Maintenance
Kit.
E E E E
Press the { { { { OK} } } } key.
The ADF counter is reset automat-
ically.
Advertisement
Table of Contents
