Exiting Energy Saver Mode
Your machine exits Energy Saver Mode automatically when a fax is received, an
e-mail message is received with the NIC FAX unit, and paper is printed out with
the PC printing function (optional).
To exit Energy Saver Mode manually:
• In Energy Saver Standby mode, press the { { { { Energy Saver/Clear Modes} } } } key.
• In Fax Standby mode, press any key.
• Place an original.
• Pick up the optional handset or an external telephone.
• Pull out the main paper tray.
• Open the front cover.
• Open the right cover.
• Open the lower right cover of the optional paper tray unit.
Selecting the Energy Saver Mode type
To select the Energy Saver Mode type, adjust the bit switch below with the User
Parameters. See p.138 "User Parameters" (switch 05, bit 6).
❖ ❖ ❖ ❖ Switch 05, bit 6
• Energy Saver Standby: To let the heating roller cool to room temperature,
set bit 6 to 0.
• Fax Standby: To let the heating roller cool halfway set bit 6 to 1.
Reception in Energy Saver Mode
Once in Energy Saver Mode, you can still receive messages. When a message is
received, the machine prints it and returns to Energy Saver Mode.
Specifications
10
203