Gestetner F540 Advanced Features page 159

D D D D
Press 0 0 0 0 or 1 1 1 1 until "4. Key Op.
Tools" is displayed.
E E E E
Press the { { { { OK} } } } key.
F F F F
Press { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } .
G G G G
Press the { { { { OK} } } } key.
H H H H
Press 0 0 0 0 or 1 1 1 1 until "13. G3 Analog
Line" is displayed.
Note
❒ The code for each function that
appears on the display varies
depending on the installed op-
tions or functions settings.
I I I I
Press the { { { { OK} } } } key.
J J J J
Depending on the setting you re-
quire, use one of the following
procedures:
• To program Own Fax Number,
s e e p . 5 5 " O w n N a m e / F a x
Header/Own Fax Number",
Basic Features.
• To select Line Type, see p.151
"Selecting Line Type".
• To change the Select Line set-
ting, see p.151 "Changing the
Select Line setting".
• To program Outside Access
Number, see p.152 "Program-
ming Outside Access Number".
Using Key Operator Settings
Selecting Line Type
A Press 0 0 0 0 or 1 1 1 1 to select "2. Line
Type" is displayed.
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to set your ma-
chine for a tone dial line or a
pulse dial line.
D Press the { { { { OK} } } } key.
Changing the Select Line setting
A Press 0 0 0 0 or 1 1 1 1 to select "3. Select
Line" is displayed.
Note
❒ The code for each function
that appears on the display
varies depending on the in-
stalled options or functions
settings.
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to select "Exten-
sion" or "Outside".
D Press the { { { { OK} } } } key.
7
151