Table of Contents
Advertisement
Switching Two–sided Reception
on/off
A Press 0 0 0 0 or 1 1 1 1 until "1. On/Off"
is displayed.
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to select "On" or
"Off".
D Press the { { { { OK} } } } key.
Note
❒ If you turn on Two-sided Re-
ception without program-
m in g a s p e c ifi ed s en d e r
beforehand, you can print all
received messages on both
sides of paper. However,
whether this feature works
depends on the size and
width of incoming faxes, the
tray used for printing, and
the type of a reception.
Programming/changing a
specified sender
A Press 0 0 0 0 or 1 1 1 1 to until "2. Pro-
gram Sender" is displayed.
B Press the { { { { OK} } } } key.
C Enter the sender name or send-
er number of the other party's
fax machine you want to pro-
gram as a specified sender.
Using Key Operator Settings
D Press the { { { { OK} } } } key.
E Press 0 0 0 0 or 1 1 1 1 to choose wheth-
er to store this item as a wild-
card.
Reference
p.85 "Entering Characters",
Basic Features
F Press the { { { { OK} } } } key.
Note
❒ To program another specified
sender, repeat the procedure
from step B.
Deleting a specified sender
A Press 0 0 0 0 or 1 1 1 1 to select "3. De-
lete Sender".
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to display the
specified sender you want to
delete.
D Press the { { { { OK} } } } key.
Printing a list of specified senders
A Press 0 0 0 0 or 1 1 1 1 until "4. Print
Sender List" is displayed.
B Press the { { { { OK} } } } key.
C Press the { { { { Start} } } } key.
The list is printed out.
7
127
Advertisement
Table of Contents
