Table of Contents
Advertisement
Key Operator Settings
G Enter the first time for the first
on/off switching with the num-
ber keys.
Note
❒ You can enter any time be-
tween 1:00 and 12:59.
H Press the { { { { OK} } } } key.
I Press 0 0 0 0 or 1 1 1 1 to select whether
to turn the heater on or off at
the set time.
J Press the { { { { OK} } } } key.
K Now, repeat steps E E E E to J J J J to
program the time for the sec-
ond switching.
7
User Parameters
The User Parameters allow you to customize various settings to match your needs.
Set the switches of each parameter to a new value to make changes to the settings.
Preparation
Some User Parameters require installation of optional equipment or opera-
tions such as turning a function on or off before changing the switch values.
❖ ❖ ❖ ❖ Switches and Bits
Each User Parameter has a set of switches, and each of the switches consists
of eight bits, whose values are "0" or "1". The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between "0" and "1".
Switch 00
Note
❒ The diagram above describes the change of setting for bit 6 of switch 00 from
"0" (Memory Transmission) to "1" (Immediate Transmission).
138
bit 7
bit 6
bit 5
0
0
0
↓
↓
↓
0
1
0
L If you want to set switches for
another day of the week, repeat
from step C C C C .
K K K K
Press the { { { { User Tools} } } } key.
The standby display reappears.
- Display When the Heater Is
-
-
-
Powered Off
When the heater is powered off, the
display is blank. When the fax ma-
chine heater is switched off with the
Energy Save Timer, you can restore
the fax machine to normal operation
temporarily by pressing the { { { { Energy
Saver/Clear Modes} } } } key so fax messag-
es in the memory can print. If the fax
machine remains idle for more than 5
minutes, the fax machine will once
again switch off the heater automati-
cally.
bit 4
bit 3
bit 2
0
0
0
↓
↓
↓
0
0
0
bit 1
bit 0
0
0
↓
↓
0
0
Advertisement
Table of Contents
