Adjusting Copy Image Density - Gestetner AO80 Operating Instructions Manual

DolphinC2_ENcopy_F_FM.book Page 28 Friday, February 25, 2005 10:46 AM
Copying

Adjusting Copy Image Density

Preparation
You can adjust the copy density to
match your originals. There are
three types of density function:
2
❖ ❖ ❖ ❖ Auto Image Density
To automatically adjust the im-
age density.
❖ ❖ ❖ ❖ Manual Image Density
You can adjust the density of
the overall original in seven in-
crements.
❖ ❖ ❖ ❖ Combined Auto and Manual Density
To copy originals with a dirty
background (such as newspa-
pers). You can adjust the fore-
ground density while leaving
the background unchanged.
Reference
Related default settings:
p.84 "Auto Image Density Priori-
ty"
p.85 "Image Density"
A A A A
Select the method of image densi-
ty adjustment.
Auto image density
A Make sure that [Auto Image Den-
sity] is selected.
Auto Image Density is high-
lighted when selected.
28
Note
❒ If Auto Image Density is not
selected, press [Auto Image
Density].
Manual image density
A If Auto Image Density is se-
lected, press [Auto Image Density]
to cancel it.
B Press [Lighter] or [Darker] to ad-
just the image density.
Combined auto and manual
density
A Make sure that [Auto Image Den-
sity] is selected.
Note
❒ If Auto Image Density is not
selected, press [Auto Image
Density].
B Press [Lighter] or [Darker] to ad-
just the image density.