Replacing The Adf Maintenance Kit - Gestetner F9103 Advanced Features

StellaF1EN-3_FM.book Page 113 Monday, November 12, 2001 11:40 AM

Replacing the ADF Maintenance Kit

In order to ensure maximum perfor-
mance of your fax machine, the ADF
Maintenance Kit is provided. You can
replace the ADF Maintenance Kit af-
ter approximately 45,000 originals
have been scanned with the ADF.
You need to replace the ADF Mainte-
nance Kit when you are prompted to
do so by a message on the display:
Follow the procedure below to re-
place the ADF Maintenance Kit.
Note
❒ If your service representative is re-
sponsible for performing this oper-
ation, this message will not appear.
❒ If you do not have an ADF Mainte-
nance Kit when you are prompted
to replace the ADF Maintenance
Kit, or if you do not have time to
perform the maintenance at that
time, at step C below, select "No",
and then press the { { { { OK} } } } key to re-
turn to the standby display so you
can continue using the fax ma-
chine. However, after you scan an
additional 100 originals with the
ADF, you will be prompted once
again to replace the ADF Mainte-
nance Kit.
❒ After "Change ADF Maintenance
Kit" message appears in the dis-
play, you can continue to send fax
messages and perform other oper-
ations.
Replacing the ADF Maintenance Kit
A A A A
A message on the display prompts
you to replace the ADF Mainte-
nance Kit when it is time for re-
placement.
B B B B
Press the { { { { OK} } } } key.
C C C C
Make sure that "Yes" is selected,
and then press the { { { { OK} } } } key.
Note
❒ If you want to replace the ADF
Maintenance Kit later, press 0
or 1 to select "No", and then
press the { { { { OK} } } } key. If you re-
place the ADF Maintenance kit
when "Change ADF Mainte-
nance Kit" message is not dis-
played, you must reset the ADF
counter. See p.69 "Resetting the
ADF Counter"
D D D D
To replace the ADF Maintenance
Kit, follow the instructions in
"Replacing the ADF Maintenance
K i t" s u p p li ed w it h t h e A D F
Maintenance Kit.
E E E E
Press the { { { { OK} } } } key.
The ADF counter is reset automat-
ically.
9
113