Remote Maintenance By Telnet; Using Telnet - Gestetner DSc224 Network Manual

Appendix

Remote Maintenance by telnet

You can view the printer status and configure the Network Interface Board us-
ing telnet.
Note
❒ You should specify a password so that only the network administrator, or a
person having network administrator privileges, can use remote mainte-
nance.
❒ The password is the same as that used for configuring the Network Interface
Board with a Web Browser.
❒ If you change a password with remote maintenance, the other passwords are
also changed.

Using telnet

The following is a sample procedure using telnet.
Limitation
❒ Only one person at a time can be logged on to do remote maintenance.
A A A A
Using the IP address or host name of the machine, start telnet.
7
% telnet IP_address
Note
❒ In order to use the host name instead of the IP address, you must write it
to the hosts file.
B B B B
Type the password.
Note
❒ The default is "password".
C C C C
Type a command.
Reference
For more information about telnet commands, see p.103 "Commands
List".
D D D D
Exit telnet.
msh> logout
When the configuration is changed, a message requests whether the changes
should be saved or not.
E E E E
Type "yes" to save the changes, and then press the { { { { ENTER} } } } key.
If you do not want to save the changes, type "no", and then press the { { { { ENTER} } } }
key. If you want to make additional changes, type "return" at the command
line, and then press the { { { { ENTER} } } } key.
102