Timeout between Decodes (Same Barcode)
Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given
period of time.
This parameter sets the timeout between decodes for same barcode in the Sense Mode. It is
programmable in 1ms increments from 0ms to 3,600,000ms. The default timeout is 1,500ms.
To learn how to program this parameter, see the b. Program the Timeout between Decodes (Same
Barcode) in Appendix 8.
Disable Timeout between Decodes: Allow the engine to re-read same barcode.
Enable Timeout between Decodes: Do not allow the engine to re-read same barcode before the
Timeout between Decodes (Same Barcode) expires.
**
Disable Timeout between Decodes
21
Timeout between Decodes (Same Barcode)
Enable Timeout between Decodes
Enter Setup
**Exit Setup