Enter Setup
Code 93
Restore Factory Defaults
Enable/Disable Code 93
Enable Code 93
Set Length Range for Code 93
The engine can be configured to only decode Code 93 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default: 1)
Exit Setup
**
Restore the Factory Defaults of Code 93
** Disable Code 93
Set the Maximum Length (Default: 48)
72