Enter Setup
Code 11
Restore Factory Defaults
Restore the Factory Defaults of
Code 11
Enable/Disable Code 11
Enable Code 11
** Disable Code 11
Set Length Range for Code 11
The engine can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default: 4)
Set the Maximum Length (Default: 48)
Exit Setup
76
**