Program The Custom Prefix/Suffix; Program The Terminating Character Suffix; Program The Code Id - Newland NLS-EM2045 Series User Manual

g. Program the Custom Prefix/Suffix
Example: Set the custom prefix to "CODE"
Check the hex values of "CODE" in the ASCII Table. ("CODE": 43, 4F, 44, 45)
1.
2. Scan the Enter Setup barcode.
3. Scan the Set Custom Prefix barcode.
Scan the numeric barcodes "4", "3", "4", "F", "4", "4", "4" and "5".
4.
5. Scan the Save barcode.
6. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
h. Program the Terminating Character Suffix
Example: Set the terminating character suffix to 0x0A
1. Scan the Enter Setup barcode.
2. Scan the Set Terminating Character Suffix barcode.
Scan the numeric barcodes "0" and "A".
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
i. Program the Code ID
Example: Set the Code ID of PDF417 to "p"
Check the hex value of "p" in the ASCII Table. ("p": 70)
1.
2. Scan the Enter Setup barcode.
3. Scan the Modify PDF417
Scan the numeric barcodes "7" and "0".
4.
5. Scan the Save barcode.
6. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
Code ID barcode.
120