Timeout Between Decodes (Same Barcode) - Newland NLS-FM3051-2X User Manual

Enter Setup

Timeout between Decodes (Same Barcode)

Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given
period of time.
To enable/disable the Timeout between Decodes (Same Barcode), scan the appropriate barcode below.
Enable Timeout between Decodes (Same Barcode): Do not allow the scanner to re-read same
barcode before the timeout between decodes (same barcode) expires.
Disable Timeout between Decodes (Same Barcode): Allow the scanner to re-read same barcode.
Disable Timeout between Decodes (Same Barcode) ** Enable Timeout between Decodes (Same Barcode)
The following parameter sets the timeout between decodes for same barcode. It is programmable in 1ms
increments from 0ms to 65,535ms. The default setting is 1,500ms.
To learn how to program this parameter, see Appendix 5.
Timeout between Decodes (Same Barcode)
33 ** Exit Setup