Program The Duration Of Good Read Beep (Type 1); Program The Frequency Of Good Read Beep (Type 1); Program The Good Read Led Duration - Newland NLS-EM2045 Series User Manual

d. Program the Duration of Good Read Beep (Type 1)
Example: Set the good read beep duration to 100ms
1. Scan the Enter Setup barcode.
2. Scan the Custom (20~300ms) barcode.
Scan the numeric barcodes "1", "0" and "0".
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
e. Program the Frequency of Good Read Beep (Type 1)
Example: Set the good read beep frequency to 3000Hz
1. Scan the Enter Setup barcode.
2. Scan the Custom
Scan the numeric barcodes "3", "0", "0" and "0".
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
f. Program the Good Read LED Duration
Example: Set the good read LED duration to 2000ms
1. Scan the Enter Setup barcode.
2. Scan the Custom (1
Scan the numeric barcodes "2", "0", "0" and "0"。
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
119
barcode.
(20~20000 Hz)
10000ms) barcode.
~