Aztec Code; Restore Factory Defaults; Enable/Disable Aztec Code; Set Length Range For Aztec Code - Newland NLS-EM2045 Series User Manual

Enter Setup

Aztec Code

Restore Factory Defaults

Restore the Factory Defaults of Aztec Code

Enable/Disable Aztec Code

Enable Aztec Code ** Disable Aztec Code

Set Length Range for Aztec Code

The engine can be configured to only decode Aztec Code barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 3832)
91 **Exit Setup