Chapter 3 Scan Mode; Trigger Mode; Sense Mode - Newland NLS-EM2045 Series User Manual

Embedded 2d barcode scan engine

Table of Contents

If the Trigger Mode is enabled, receiving an active trigger signal activates a decode session. The session

continues until the barcode is decoded or the active signal is no longer present. For good decode, the

engine transmits decoded data via communication port. To activate another session, the Host needs to

first terminate the trigger signal, wait 20ms or longer and then send an active signal.

If the Sense Mode is enabled, the engine activates a decode session every time it detects a change in

ambient illumination. The decode session continues until the barcode is decoded or the Decode Session

Timeout expires.

Receiving a trigger signal can also activate a decode session. The decode session continues until the

trigger signal becomes invalid or the barcode is decoded or the Decode Session Timeout expires. The

trigger signal needs to be terminated before the engine is able to monitor ambient illumination again.

Chapter 3 Scan Mode

Trigger Mode

** Sense Mode

Enter Setup

**Exit Setup

Table of Contents